Please note, if you click and buy through links on our site, we may earn a small affiliate commission at no extra cost to you. Learn More

Security cameras can bring live video and motion events into Home Assistant, where they can trigger lights or visitor announcements. Available controls and detections depend on each camera’s integration.

My top pick is the Reolink CX810. Its direct Reolink integration brings person, vehicle, and animal detection into Home Assistant without a separate hub.

My second pick is the TP-Link Tapo C120. It adds a 2K Wi-Fi feed and software Privacy Mode for a room where recording is only needed some of the time.

Home Assistant Integration
Reolink (Local Push, direct to camera)
Data Transmission
PoE / Ethernet
Power Options
PoE or 12V DC
Resolution
4K / 8MP (3840 × 2160)
Night Vision Type
Low-light color, with warm spotlight
IP Rating
IP67
Storage Options
microSD, compatible Reolink NVR, FTP

The Reolink CX810 is a fixed-view PoE camera for a driveway or yard. A single Ethernet cable can carry power and data from an 802.3af PoE switch or injector. Add the initialized camera directly to Home Assistant using its local administrator account. The Reolink integration exposes person, vehicle, and animal detection as separate binary sensors, so you can turn on the driveway lights for a car and reserve a different notification for someone walking up to the house.

The camera combines a low-light ColorX sensor and lens with an adjustable warm spotlight. It can use the light already available in a driveway, and the spotlight can illuminate a darker area. There’s no infrared night mode for places where you need illumination without visible light. The integration exposes spotlight control as a floodlight entity on supported firmware. When Home Assistant turns that entity off, the camera goes back to its own light mode, so check the camera’s schedule or motion settings if you want the light to stay off.

Use the default Fluent stream on a wall dashboard and enable Clear if you need more detail. Check 4K playback on the phone or tablet you’ll actually use, since H.265 support varies by browser. A microSD card gives you local recording without buying a hub or NVR, and the Reolink media browser can open those recordings in Home Assistant.

Pros
  • Separate local triggers for people, vehicles, and animals
  • Direct connection to Home Assistant with no hub required
  • Low-light color video and adjustable warm spotlight
  • Home Assistant can play back recordings stored on the camera
Cons
  • Needs an Ethernet run and a PoE power source or separate adapter
  • No infrared night mode for a dark location where visible light is unwanted
  • The high-resolution stream needs a compatible browser or player
Runner Up
C120 (US, single camera)
Home Assistant Integration
TP-Link Smart Home (Local Polling)
Data Transmission
2.4 GHz Wi-Fi
Power Options
USB-C power adapter
Resolution
2K QHD / 4MP (2560 × 1440)
Night Vision Type
Infrared or spotlight-assisted color
IP Rating
IP66
Storage Options
microSD or optional Tapo Care

The Tapo C120 is the one I’d put on a shelf or mount by a covered entrance where there’s power and good 2.4 GHz Wi-Fi. Its magnetic base makes it easy to try an angle before mounting, and the camera takes a microSD card for local clips. Home Assistant lists the C120 under TP-Link Smart Home. You’ll need the TP-Link login used during setup and a separate Camera Account created in the Tapo app if you want live view.

The C120 makes sense when the automation you care about controls the camera. For example, you can use the Privacy Mode switch to stop streaming and recording when you get home. Verify that the switch is available with your camera’s firmware, then check that your automation turns Privacy Mode off again when you leave. This is a software setting on the C120.

The camera can detect people, pets, and vehicles in the Tapo app. If you need one of those detections as a Home Assistant trigger, verify that the actual entity changes when you walk past the camera. A switch that enables person detection is a setting. A person sensor that changes state is a trigger. The native integration polls for updates, and the C120’s ONVIF route is worth checking separately if you need a motion sensor that the native setup doesn’t provide.

Pros
  • Compact IP66 body with a magnetic base
  • Local live view through the built-in TP-Link Smart Home integration
  • Software Privacy Mode can be controlled where the switch is exposed
  • microSD recording without a Tapo Care subscription
Cons
  • Requires 2.4 GHz Wi-Fi and a nearby power source
  • Live view needs separate camera credentials and some firmware requires Third-Party Compatibility
  • Exact detection triggers depend on the integration and firmware
Home Assistant Integration
Reolink (Local Push, direct to doorbell)
Data Transmission
PoE / Ethernet
Power Options
PoE, 12–24V AC, or 24V DC
Resolution
5MP (2560 × 1920)
Night Vision Type
Infrared
IP Rating
IP65
Storage Options
microSD or compatible Reolink NVR

The black Reolink Video Doorbell PoE makes the most sense when an actual doorbell press needs to do something in Home Assistant. Its Visitor binary sensor can trigger a snapshot notification or an announcement on a household speaker. The person sensor can run a separate automation, such as switching on the entry light after sunset when someone walks up without ringing. The doorbell connects directly to Home Assistant and comes with a plug-in Reolink Chime.

The black model has a wide 4:3 picture, which suits a broad porch or two people standing side by side. Reolink’s white PoE variant has a taller view and adds package detection. Choose the black model for the wider view and the doorbell-press trigger. Check the white version if the parcel drop spot directly below the lens is your priority.

Power and network can share one PoE cable. Existing compatible doorbell wiring can power the unit, but you still need Ethernet for the network connection. The Reolink integration can play saved quick replies. If you want to speak live from Home Assistant, its two-way audio requires the Labs preview feature, RTSP selected in the integration, and an HTTPS connection to Home Assistant.

Pros
  • Visitor sensor distinguishes button presses from person detection
  • Direct local integration with quick replies and access to stored clips
  • Wide view and an included plug-in chime
Cons
  • Ethernet is required even when using separate doorbell power
  • Package detection is a feature of the white PoE variant
  • Two-way audio in Home Assistant needs extra configuration
Home Assistant Integration
UniFi Protect (Local Push, Protect console required)
Data Transmission
PoE / Ethernet
Power Options
PoE
Resolution
4K / 8MP (3840 × 2160)
Night Vision Type
Infrared
IP Rating
IP66
Storage Options
UniFi Protect console storage

The G6 Turret is the pick if you already record with UniFi Protect and want to use its detections in Home Assistant. This fixed 4K PoE turret detects people, vehicles, and animals. Home Assistant connects to the Protect console, where those supported detections can appear as sensors and events. You can set up a driveway detection in Protect and use the corresponding event in Home Assistant to switch on a light or send a notification.

Set up the camera in Protect first, then create an integration API key on the console. The API-key connection can provide live streams and supported smart detections. Add a local Protect user to the Home Assistant connection if you also want to browse clips or fetch recorded event thumbnails through Home Assistant. That matters if the notification needs to show who triggered it.

UniFi Wi-Fi or a UniFi switch alone won’t run Protect. If this is your first UniFi camera, budget for a compatible console, storage, and PoE power. The camera is a much easier choice when that equipment is already in place.

Pros
  • Local Protect integration exposes supported smart-detection sensors and events
  • Event clips and thumbnails available with a local Protect user
  • 4K PoE turret with infrared and an IP66 enclosure
Cons
  • Requires a UniFi OS console that runs Protect
  • Clip browsing and event thumbnails require a local user in addition to the API key

Decision Factors When Choosing a Home Assistant Camera

Start With the Automation You Want to Run

Write down the event, condition, and action you need. For example, a person at the side gate after sunset should turn on the side light. That calls for a person sensor, a time or sun condition, and a light Home Assistant can control. If you only need a live feed on a tablet, a camera entity is enough. If you want a doorbell to announce visitors, look for a button-press event or sensor.

Check the integration’s documentation for the exact model, then open the device’s entity list after pairing. Walk into view, drive into the detection zone, or press the doorbell and check which entity changes. Some integrations expose a switch to enable a feature without creating a sensor for that feature. Run this check before mounting the camera in a hard-to-reach spot.

Check Where the Camera Sends Its Events

Reolink and UniFi Protect can push supported events to Home Assistant over your network. TP-Link Smart Home checks the device at intervals. For a camera that should turn on an entry light as you approach, try the trigger in the actual location and make sure it responds soon enough. Check after an ordinary camera or Home Assistant restart, too.

A local connection still needs a clear route between devices. If your cameras are on a separate network, allow Home Assistant to reach them and check that required event traffic can get back. Some cameras may need to be added by IP address when automatic discovery can’t cross subnets. Our camera ecosystem compatibility guide explains how app, recorder, and hub support fit together.

Plan for Power, Recording, and Playback

PoE suits a permanent outdoor camera when you can run Ethernet. A plug-in Wi-Fi camera is easier to place where the cable run would be awkward, provided it has a strong signal and a suitable power outlet. If a camera requires a hub or recorder to expose the features you want, include that equipment when you compare the cost of the systems.

Pick a place for the footage to live. The Reolink picks can record to microSD or a compatible Reolink recorder, and Home Assistant can browse supported Reolink recordings. The G6 Turret stores footage through Protect. Home Assistant’s live camera card by itself doesn’t keep a recording history. For a notification that opens a clip, verify clip access as well as the camera trigger. If you use the Tapo C120 with a third-party recorder, TP-Link limits simultaneous use of Tapo Care, local card or hub storage, and NAS/NVR/ONVIF recording to two of those options.

Common Questions

Does RTSP Give Home Assistant Motion Alerts?

RTSP carries the live stream. To trigger an automation, Home Assistant also needs an event source, such as the camera’s native integration or a compatible ONVIF event. Home Assistant’s ONVIF integration can create sensors for supported topics that a camera publishes. Check the exact event you need with the installed firmware. For more on the video connection, see what RTSP does on a security camera.

Why Can I See the Camera in Its App but Get a Blank Home Assistant Tile?

Check the stream credentials and video profile. On Tapo, enable the separate Camera Account for live view. When adding a camera through ONVIF, make sure it offers an H.264 stream Home Assistant can use. For a Reolink dashboard, start with Fluent, then try the higher-quality stream on the device where you’ll watch it.

Do I Need Frigate for These Cameras?

The built-in integrations can give Home Assistant a live view and expose supported controls or detections without Frigate. Add a separate recorder or detection service if you want it to keep footage or analyze the video itself. For a front-door announcement or a driveway light, start by checking what the camera already sends to Home Assistant.

Conclusion

If you can run Ethernet, start with the Reolink CX810 for local detection triggers and outdoor coverage. The TP-Link Tapo C120 is easier to place near an outlet for a dashboard feed and a privacy schedule. Choose the Reolink doorbell for a dedicated button-press automation, or the G6 Turret if your cameras already record through UniFi Protect.