Please note, if you click and buy through links on our site, we may earn a small affiliate commission at no extra cost to you. Learn More
Frigate uses local camera feeds to record video and detect people or vehicles. Cameras with separate recording and detection streams let it save detailed footage while analyzing a smaller image.
My top pick is the EmpireTech IPC-T54IR-ZE-S3. Its adjustable lens helps frame a gate or driveway, and it has a 720p stream you can dedicate to detection.
My second pick is the Reolink RLC-510A. This fixed-lens PoE camera gives you 5MP H.264 video and a separate substream for covering a straightforward approach.
The EmpireTech IPC-T54IR-ZE-S3 is my first choice for a driveway or gate where you need to adjust the framing after the camera is mounted. Its motorized lens goes from a 115° horizontal view at the wide end to 47° at the tight end. Zoom in on the route people actually take and they occupy more of the frame on both the recording and detection feeds.
Start with the 4MP main stream for recordings and the 720p fourth stream for detection. There’s also a 1080p option if a person at the far end of the scene looks too small on the 720p feed. The 1/1.8-inch sensor and built-in infrared suit a dark approach where a visible spotlight would be intrusive. IR footage is monochrome, so add scene lighting if you need to distinguish clothing or vehicle colors at night.
Use Frigate’s AAC conversion preset if you want widely playable audio from the built-in microphone. EmpireTech lists formats such as G.711 and PCM for this model.
- Motorized lens lets you tighten the view around a gate or driveway
- 720p and 1080p secondary streams give you a choice for detection
- Built-in infrared and IP67 housing suit exposed, unlit approaches
- Built-in infrared gives monochrome night footage in darkness
- Listed microphone codecs omit AAC
The Reolink RLC-510A is the one I’d buy for a side path or a driveway where its 80° horizontal view already fits. It sends 5MP video in H.264 and offers a separate, lower-bitrate substream. You can give Frigate the detailed view for recording and leave the smaller feed running for detection.
Enable HTTP in the camera’s network settings before adding it to Frigate. In the Add Camera wizard, choose Reolink under manual selection. Frigate recommends HTTP-FLV for this resolution class and can pick the appropriate stream through the wizard. Reolink also documents RTSP access if you need it for another viewer.
The 4 mm lens is fixed, so try a closer mounting point if the gate looks too small in the frame. Its infrared LEDs can light a dark side yard in black and white. If color matters there after dark, add visible lighting or choose a camera with a white light.
- H.264 main stream and a separate lower-bitrate feed
- Frigate’s Reolink setup uses HTTP-FLV for this resolution class
- 802.3af PoE and IP67 housing fit outdoor cable runs
- Fixed 80° view limits what you can frame from one mounting point
- Night illumination is infrared only
Choose the Amcrest IP8M-2796EB-AI for a wide driveway where you want 4K recordings you can zoom into later. Its 108° horizontal view takes in more of the scene than the Reolink’s 80° view. Frigate can record the 3840 × 2160 stream while using the 640 × 480 substream to look for objects nearby.
Walk the far edge of the driveway and check the detection view before relying on alerts from that area. The small substream spreads its pixels across a wide scene, and its 4:3 shape differs from the 16:9 recording. If distant detections are important, the EmpireTech’s tighter lens and larger secondary streams give you more room to adjust.
The built-in white light can preserve color where it reaches. Switch to infrared if you want the light off at night. At full resolution the camera tops out at 15 fps, which suits a driveway overview better than a close view of fast traffic.
- Records 4K over RTSP while supplying a separate detection feed
- Wide 108° horizontal view covers a broad approach
- Offers infrared and visible illumination for different night scenes
- 640 × 480 substream can leave distant objects small
- Full-resolution recording tops out at 15 fps
The Hikvision ColorVu DS-2CD2387G2P-LSU/SL is for a frontage where people can approach from either side of the camera. The two fixed lenses combine into one approximately 180° view, so Frigate receives a single 5120 × 1440 recording feed with both sides visible at once.
Try the 960 × 272 H.264 substream first for nearby subjects. If people look too small in that feed, the 1920 × 536 option gives Frigate more pixels to work with at the cost of more decoding. For a far gate or a small part of the yard that needs close detail, a tighter second camera is a better use of those pixels than relying on the panorama alone.
The camera uses white light to keep a dark scene in color, so check where that light will fall before mounting it. Hikvision rates the full-resolution stream at up to 20 fps with wide dynamic range off, or 15 fps at 60 Hz with it on.
- Records both sides of a frontage in a single panoramic feed
- Two panoramic substream sizes let you adjust detection resolution
- Plain H.264 is available on both feeds
- A wide view gives distant subjects fewer pixels than a tight view
- Uses visible white light when extra illumination is needed
The Amcrest IP4M-1041B suits an indoor room with an outlet nearby. It gives Frigate a 4MP main stream and a VGA substream over RTSP. It works on 2.4 GHz Wi-Fi, and there’s a wired Ethernet port if you can run a cable back to the router. Either way it needs its own 5 V power supply.
Use the pan and tilt controls to aim it at the door or passage you want to record, then keep the view steady once you draw detection zones. If the camera moves, the boundaries stay in the same place on screen and may cover a different part of the room. Its indoor housing and short-range infrared make it a poor choice for an outdoor eave or for shooting through a window after dark.
- Separate H.264 feeds for indoor recording and detection
- Wired Ethernet option where 2.4 GHz Wi-Fi is crowded
- Pan and tilt make a shelf-mounted camera easier to aim
- Separate DC power is needed even when using Ethernet
- Indoor housing and a moving view limit how you can use it
Decision Factors When Buying a Camera for Frigate
Check the Main Stream and Substream
Use the main stream for Frigate’s record role and a lower-resolution stream for detect. Frigate writes the recorded video without re-encoding it, so you can retain the detail from the main feed without asking your detector to work on the full-resolution frames. A higher-resolution detection stream can help when a person looks tiny in the smaller feed. Try a tighter view first if the scene contains a lot of space you don’t need.
Start at about 5 fps for detection and 15 fps for recording. Set the rates in the camera where you can, so Frigate receives fewer frames it would otherwise need to decode and discard. Choose the same aspect ratio for both streams when the camera offers it. When the recording feed is 16:9, a 720p or 640 × 360 detection feed keeps the same shape.
Choose a Codec You Can Play Back
Start with plain H.264 for the broadest live-view and playback support. H.265 can save disk space at comparable quality, but try a clip in the browser or phone you use for playback before committing to it. If you record sound, choose AAC where the camera offers it. Frigate has an audio conversion preset for cameras that send other formats.
Wire the Cameras You Depend On
Use PoE for entrances and outdoor runs where you can route Ethernet. A PoE switch or injector powers the camera and carries the video over the same cable. If an indoor camera has to use Wi-Fi, check the recording timeline for gaps when your network is busy. On existing systems, check that Frigate can reach the camera or the recorder’s channel stream over your local network. The RTSP guide explains what to look for.
How to Choose a Frigate Camera for Each Location
Stand where you plan to mount the camera and pick the point where you need the most detail. For a gate set back from the house, use a narrower lens so a person occupies more of the detection image. For a short side path, a fixed 4 mm camera can be enough. Choose a panoramic model where it matters more to see someone enter from either end of the frame.
Check both feeds after dark. Have someone walk the route and check Frigate’s detection view and the saved clip. An infrared image can show the movement clearly while losing color, and a brightly lit porch can still leave a person at the far end of the driveway in shadow. Look at what the camera captures at the point you care about before you buy more of the same model.
Work out disk capacity from the average bitrate of the recording feeds and how much video you plan to keep. Four cameras averaging 4 Mbps each write about 5.18 TB over 30 days of continuous recording before you leave room for overhead. Use the recording storage calculator to size your own system, then check the actual retention after it has been running.
Frequently Asked Questions
Does a Camera Need Its Own AI for Frigate?
Frigate runs object detection on your server using the video feed. A camera that supplies suitable local streams can work even if it offers no person or vehicle alerts of its own. For a camera with built-in tracking, check whether it changes the view while you’re using fixed zones in Frigate.
Can You Use Battery Cameras with Frigate?
For continuous recording, choose a camera that can stream continuously. A battery model that sleeps between events can leave Frigate with gaps or no usable local feed. Check whether the exact camera and any required hub can provide an uninterrupted stream before buying.
Does Every Frigate Camera Need RTSP?
RTSP is a common way to get local video into Frigate, and Frigate also supports HTTP-FLV for compatible cameras such as the Reolink here. Check the exact model and firmware for a usable main stream and substream. Frigate’s camera-specific instructions explain which connection to use for each supported setup.
Conclusion
I’d buy the EmpireTech IPC-T54IR-ZE-S3 for a gate or a driveway where the ability to tighten the shot matters. For a side path or a shorter approach that already fits a fixed lens, I’d choose the Reolink RLC-510A. Set up recording and detection on one camera first and check the view after dark before ordering the rest.