Lorex A10 vs Lorex N3 Bullet Camera Comparison

Overview

E841CAB

LNB9242B

Power & Data Feeds

Both cameras are IP-based devices that need an NVR to function. As such, they draw power from an AC adapter and transfer data through network cables.

That said, both cameras do support PoE. It combines power and data into a single Cat5/Cat6 cable.

It simplifies the cabling and installation. However, you must have a PoE-compatible NVR or pass the network cables through a PoE switch.

E841CAB

LNB9242B

Camera & Lens

Both cameras can record at a maximum 4K resolution of 3840x2160. That said, the Lorex N3 can record at a higher framerate of 30fps. The Lorex A10 can only reach 15fps maximum at similar resolution.

For the Lorex N3, please note that the framerate will dip to 20fps when smart motion detection is enabled.

Both cameras share the same 2.8mm fixed focus lens. They do have slightly different Fstop values and differences in the horizontal FOV. The Lorex N3 covers 107° horizontally, while the A10 is 105°.

E841CAB

LNB9242B

Night Vision

Night vision performance can be a notable aspect when comparing the two. The Lorex N3 is part of the Nocturnal series, where they emphasise the color night vision.

However, the Lorex A10 also supports color night vision. It’s difficult to compare as they don’t specify the illumination level at which they switch to infrared.

That said, the Lorex N3 tends to have better infrared performance. It can record a maximum range of 150ft under dim lighting. Under pitch black lighting conditions (0lux), it has a range of 98ft.

Meanwhile, the Lorex A10 has 130ft range and 90ft range for these situations.

E841CAB

LNB9242B

Audio

The Audio-based features are also worth noting down. The Lorex N3 supports audio recording, whereas the Lorex A10 does not.

However, both cameras do not support two-way audio and sirens/alarms. The microphone is only there to record audio and stitch them into the video file.

Also, for the Lorex N3, audio recording is disabled by default. Make sure you check with local laws regarding audio surveillance before enabling this.

E841CAB

LNB9242B

Storage & Interoperability

Both cameras rely on an NVR to function. As such, their primary method of storing footage is via the video recorder.

That said, you can insert a MicroSD card for both cameras. The camera will off-load footage to the MicroSD card, which you can access later.

You can also access the footage on the MicroSD card remotely, but only when you access the camera through the browser-based web-portal. The MicroSD card footage doesn’t get stored in the NVR or the cloud.

Also, Lorex cameras have almost zero interoperability as they only work within the Lorex mobile app and browser-based webapp.

E841CAB

LNB9242B

Cloud

These cameras are not standalone devices. They need a compatible NVR to connect with the Lorex app and other internet services.

As such, these cameras cannot store footage directly to the cloud. You must configure cloud or FTP storage via the NVR.

E841CAB

LNB9242B

Intelligence

The Lorex N3 takes the lead in terms of intelligent functions. It supports human and vehicle detection. The Lorex A10 doesn’t support these functions.

These intelligent functions refine the motion detection capabilities of the device. However, for these to work, you must connect the camera to a compatible Lorex NVR.

Also, the framerate can dip significantly when these are enabled.

E841CAB

LNB9242B

PTZ

Both devices are bullet-style cameras. As such, they don’t support any panning and tilting functions.

Also, they can't perform optical zoom as they have a fixed lens.

Depending on the NVR and VMS, the cameras might support digital zoom.

E841CAB

LNB9242B

Device

Both devices have an impressive IP67 rating. It makes them capable of withstanding outside elements without any issues.

However, despite the IP67 rating, keep the cameras away from direct water and sunlight.

The Lorex A10 has a wide temperature range of -22°F to 140°F. However, the Lorex N3 fares a little better. It’s range is -40ºF to 140ºF.

If you're concerned about subzero temperatures in your location, it’s best to go for the high-end Lorex N3.

E841CAB

LNB9242B

App

Since both apps are Lorex cameras, they have access to the mobile and desktop applications. However, either camera needs to be connected to a compatible Lorex NVR.

When the cameras are connected to an NVR with internet access, you can access the camera through the apps. Here, you can check the live view, or manage certain camera settings.

Also, after linking the camera or NVR to the app, you can receive push notification for motion-detected events.

E841CAB

LNB9242B