A security camera can beep to indicate a low battery or a network issue. Other than that, a surveillance system might put out beeps to indicate tampering or issues with the hard drive.  These beeping noises can indicate unnecessary alerts as well. Therefore, you should customize the beeper only for emergencies and specific high-priority events. … Read more

You can plug in the network cable of your security camera to the computer and start recording footage. However, you must configure the IP addresses under the same network to access the camera.  You can connect a single camera to your computer directly or set up multiple cameras using a Wi-Fi router. Regardless of the … Read more

Video loss in security cameras is mainly due to low power, loose connections, or IP address conflicts. Besides that, weak Wi-Fi signals and faulty equipment can contribute to this.  To prevent video loss, you must carry out regular maintenance and inspections. Setting up surge protectors or signal boosters can also help. Things to Know 6 … Read more

The blinking green light on a security camera indicates the camera is powered, connecting to a network, or actively recording.  This isn’t always the case, as brands can use different patterns and colors to indicate these. Therefore, you should confirm the blinking light pattern using your camera’s user manual. Things to Know What Does it … Read more

The best way to tell if a smoke detector is a hidden camera is if you notice a camera lens on the device itself. Additionally, you can use an RF signal scanner or your smartphone camera to detect IR waves and confirm.  You can also check your Wi-Fi network or look for suspicious wires or … Read more

A powerful magnet could disable a security camera. However, this largely depends on the power and proximity of the magnet. That said, this isn’t always guaranteed with modern cameras. It’s because they don’t rely on magnetic storage media, which is the most susceptible component.   Things to Know How a Magnet Can Damage a Security Camera … Read more

You can connect a security camera to a TV by plugging in the video cable from the security camera to your display.   That said, you might run into issues with compatibility. This is because connectors or devices will need adapters to run in between.   Bypassing a DVR is not recommended for most systems. You’ll lose … Read more

TVs and computer monitors both have their uses in a security camera system. But, if you’re setting up a high-end monitoring station, computer monitors are the best.  Monitors provide a rich array of colors at a higher pixel density. It makes them more compact and easy to review high-quality footage.  TVs have their place, but … Read more

CCTV refers to a wired, point-to-point system attached to a specific monitor. Meanwhile, surveillance cameras use wireless technology and don’t always need a monitoring station.  These terms are often used interchangeably in the context of security and surveillance. However, they have different use cases and a few technical differences. Things to Know The Major Differences … Read more

Most wireless security cameras have a transmission range of approximately 150 feet indoors and around 500 feet within an open space with the router or hub within direct line of sight. However, this effective range is not guaranteed since it can vary depending on physical obstructions and signal interference. Removing physical obstacles such as walls … Read more