Lorex A10 vs Lorex N3 Turret Cameras

Overview

E841CD-E

LNE9242B

Power & Data Feeds

Both cameras are IP-based devices that need an NVR to function. As such, they can only receive power through a DC adapter or PoE.

Both devices can only transfer video data through network cables.

E841CD-E

LNE9242B

Camera & Lens

Both cameras use an 8MP image sensor for recording video footage. They can both record at a 4K resolution of 3840x2160.

However, the Lorex N3 camera can record 4K footage at 30fps. It only dips to 20fps when intelligent motion detection is enabled. Meanwhile, the Lorex A10 can only do 15fps.

Both cameras use the same type of fixed focus 2.8mm lens. It’s the de facto option for these general-purpose cameras.

For FOV, the Lorex N3 offers a slightly higher 107° horizontal FOV. The A10 has 105°.

E841CD-E

LNE9242B

Night Vision

The Lorex N3 turret camera belongs to the “Nocturnal” lineup. The color night vision features of this camera tends to be better than the Lorex A10.

Unfortunately, Lorex doesn't provide exact minimum illumination values to quantify this.

Also, the Lorex N3 has slightly longer infrared range. It can see as far as 150ft in low-light conditions and 98ft in pitch black. The Lorex A10 can do 130ft and 90ft, respectively.

E841CD-E

LNE9242B

Audio

Both cameras include a microphone to record audio. However, that’s just about it with audio-based features.

You don’t get two-way audio nor a siren. The microphone records audio only to stitch it into the video footage.

Usually, the audio recording setting is disabled by default. Make sure you check local laws regarding this before enabling.

E841CD-E

LNE9242B

Storage & Interoperability

Both cameras are Lorex devices, and they only respond to the Lorex ecosystem. This includes the NVRs, mobile app and browser portal.

For storage, the cameras can offload into a compatible NVR. Other than that, both cameras support MicroSD card slots for on-site storage.

You can review the footage remotely via the web portal. The alternative is to transfer the MicroSD card to a computer and check the footage there.

E841CD-E

LNE9242B

Cloud

Both cameras don’t support cloud storage directly. They are IP-based cameras that need an NVR or MicroSD card to offload video footage.

That said, you can configure the NVR to upload footage to an FTP server or NAS system.

E841CD-E

LNE9242B

Intelligence

Intelligent features is where the novelty of the Lorex N3 cameras come into play. Here, this camera readily supports human and vehicle detection.

The older Lorex A10 does not support human and vehicle detection.

Usually, this can be the deciding factor. If you hope to install the camera in a location with a lot of foot-traffic, the N3 is the obvious choice.

However, please note that you need a Lorex NVR with intelligent functions for these to work.

E841CD-E

LNE9242B

PTZ

Both dome cameras; unfortunately, don’t support PTZ functions. They have a fixed lens that can only carry out digital zoom.

E841CD-E

LNE9242B

Device

The Lorex A10 and N3 are both IP67-rated cameras. They come with weather-proof enclosures that don’t mind a little sun and rain.

Also, the cameras are hardy against temperature changes. Both cameras can withstand a maximum temperature of 140°F.

That said, the Lorex N3 has a subzero temperature threshold of -40°F. The A10 can only last up to -22°F.

This might seem trivial at first. However, it can make a world of difference in colder climates.

E841CD-E

LNE9242B

App

Both cameras can’t interface directly with the mobile app. Instead, they need to run through a Lorex NVR for this functionality.

When set up via an NVR, you can access the camera’s features. This opens up remote viewing and controlling the camera settings.

Also, this helps you to receive motion alerts directly to your smart device.

E841CD-E

LNE9242B